Polycom RealPresence 1800 Getting Started Manual page 31

P R P C
OLYCOM EAL RESENCE OLLABORATION
Mounting the RealPresence Collaboration Server (RMX) 2000/4000 in a
19" Rack
P R P C
OLYCOM EAL RESENCE OLLABORATION
S .8.6
ERVER V
T
ASK
1. To install RTM ISDN Card on RealPresence Collaboration Server:
2. On the new RTM ISDN card, move the ejector levers to their fully open
position.
3. Slide in the RTM ISDN card in the RealPresence Collaboration Server
slot.
A I
DDITIONAL NFORMATION
card in the opposite-facing front slot.
Figure 1-6: Install RTM ISDN Card on RealPresence Collaboration Server 2000
4. Push the card into the slot until the ejector levers touch the front edge
of the card cage.
5. Push the ejector levers to their fully closed position.
6. Tighten the captive screws on each side of the rear panel of the card,
securing the RTM ISDN card to the RealPresence Collaboration Server.
There are two methods for installing the RealPresence Collaboration Server
2000/4000 in a 19" rack:
•
Using the rack rail runners on the rack
– Install the telescopic rail runners, as described in Install the Tele-
scopicRailRunnersontheRack.
S G S
ERVER ETTING TARTED
I R P
NSTALLING THE EAL RESENCE
: An RTM ISDN card must connect directly to an MPMRx
G
UIDE
A E I
PPLIANCE DITION NSTALLATION
C S (RMX) 2000
OLLABORATION ERVER
29