Chapter 2: Unloading Truck Shipment - MacDon R113 Assembly Instruction Manual

Chapter 2: Unloading Truck Shipment

To unload machines from a truck shipment safely and without damage, understand the weights and lifting requirements,
and familiarize yourself with the procedure.
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator's seat for any reason.
CAUTION
Equipment used for unloading must meet or exceed the requirements specified below. Using inadequate equipment
may result in chain breakage, vehicle tipping or machine damage.
Minimum capacity
Minimum height
Overhead lifting quality 12.7 mm (1/2 in.)
Figure 2.1: Unloading Hitch
1. Remove hauler's tie-down straps and chains.
2. Attach chain (A) to two brackets (B) on top of hitch as shown.
3. Adjust chain lengths so hitch is lifted evenly.
215585
Lifting Vehicle
Chain
2270 kg (5000 lb.) minimum working load
7
3630 kg (8000 lb.)
4.5 m (15 ft.)
Revision A