Table of Contents
Advertisement
4.5.
BIOS Setup Defaults Reset Button
To perform a hardware reset of BIOS default settings, perform the following steps:
1. Shut down the system.
2. Press the BIOS Setup Defaults RESET Button continuously and boot up the system. You can release the
button when the BIOS prompt screen appears
3. The BIOS prompt screen will display a confirmation that BIOS defaults have been reset and request that
you reboot the system.
32
Connector Pinouts on Module
Advertisement
Table of Contents
Need help?
Do you have a question about the Express-KL2 and is the answer not in the manual?