Emerson Centellis 2000 Shelf Release 3.0 Manual page 65

9. Remove the pluggable screw terminals from the rear of the shelf.
10.Insert the crimped ends of the power cables to the rectangular openings (3.5 mm
x 3.5 mm wide) of the pluggable screw terminals.
Product Damage
Improper cabling damages your product.
Take extreme care not to connect the power cable in reverse polarity.
11.Fasten the screws at the bottom of the pluggable screw terminals.
12.Plug the screw terminals (including the attached power cables) to the power
connectors.
Centellis 2000 Shelf Release 3.0 Installation and Use (6806800L99F)
System Installation
65