Network Management and System Access
Access via the face plate interface:
MF106
Left MF106
Right MF106
Active MF106
Standby MF106
Access via base interface channel 1:
MF106
Left MF106
Right MF106
Access via base interface channel 2:
MF106
Left MF106
Right MF106
For further information on the IP addresses of the MF106, refer
8.3
Network Management
When you need to access system components, there are various network addresses you need
to be aware of. The following subsections describe the default addresses and how they can be
changed.
118
IP Address
192.168.<SGA>.8
192.168.<SGA>.9
192.168.<SGA>.171
192.168.<SGA>.181
IP Address
172.17.<SGA>.8
172.16.<SGA>.171(If Active)
172.16.<SGA>.181(If Standby)
172.17.<SGA>.9
IP Address
172.18.<SGA>.8
172.18.<SGA>.9
172.16.<SGA>.171(If Active)
172.16.<SGA>.181(If Standby)
Centellis 2000 Shelf Release 3.0 Installation and Use (6806800L99F)
IP Addresses on page
122.