Environmental Requirements; Table 2-1 Environmental Conditions - Emerson Centellis 2000 Shelf Release 3.0 Manual

Site Preparation
2.3.1

Environmental Requirements

To ensure proper function of the system, make sure that the environment in which the system
is to be used fulfills the environmental requirements.
The environmental values must be tested and proven in the planned system configuration,
that is, the delivered system and other third-party products you want to integrate.
Operating temperatures refer to the temperature of the air circulating at the air intake of
the system and not to component temperatures.
Some of the climatic values may exceed the specification of some system components
(for example, hard disks). As Emerson cannot guarantee the functionality of third party
products that are handled or operated out of their specifications, the environmental
conditions may be limited to the specifications of these components.
The following table lists the environmental requirements.

Table 2-1 Environmental Conditions

Feature
Temperature
Temp. change
Relative
humidity
Vibration
(tested in
target
platform)
Shock
44
Operating
+5 ºC (41 °F) to +40 ºC (104 °F)
(normal operation) according to NEBS
standard GR-63-CORE
-5 °C (23 °F) to +55 °C (131 °F)
(exceptional operation) according to NEBS
standard GR-63-CORE
+/-0.5 °C/min according to NEBS standard
GR-63-CORE
5% to 90% non-condensing
according to Emerson-internal
environmental requirements
0.1 g from 5 to 100 Hz and back to 5 Hz at
a rate of 0.1 octave/minute
Half-sine, 11 mSec, 30 m/Sec
Centellis 2000 Shelf Release 3.0 Installation and Use (6806800L99F)
Non-Operating (packed state)
-40 °C (-40 °F) to +70 °C (158 °F)
+/-0.5 °C/min
5% to 95% non-condensing
according to Emerson-internal
environmental requirements
5-20 Hz at 0.01 g
20-200 Hz at -3.0 dB/octave
Random 5-20 Hz at 1m
Random 20-200 Hz at -3 dB/octave
2
Blade level packaging
Half-sine, 6 mSec at 180 m/Sec
2
/Hz
2 3
/Sec
2