Table of Contents
Advertisement
Software
11.1 Overview
The following sections provide information that you need after you have successfully installed
the hardware.
Section
Software Requirements on page 147
Blade Insertion and Extraction on page
150
The information in the following subsections assumes that you have set the shelf address on
both MF106 shelf managers to the same value.
11.2 Software Requirements
The shelf components are delivered with the software installed.
Table 11-1 Software Available on Shelf Components
Component
MF106
Fan tray
Centellis 2000 Shelf Release 3.0 Installation and Use (6806800L99F)
Description
This section contains information on which software is
installed on the system components and what tools can be
used for software upgrades.
This section contains information about the steps carried
out by the software when a blade is inserted or supposed to
be extracted.
Software
IPMC firmware
Payload:
Boot loader (Uboot)
Device Tree Binary (DTB)
Linux kernel
Initial ram disk
IPMC firmware
Chapter 11
147
Advertisement
Table of Contents
