Emerson Centellis 2000 Shelf Release 3.0 Manual page 64

System Installation
4. Set the breakers on the PEM face plates to the OFF (tripped) position if they are not
already in this position.
System Damage
Applying feed power to the PEM with the PEM breaker in the ON position damages your
system and/or system components.
The PEM breaker must be in the OFF position when you turn on the feed power.
5. Make sure that the external power feeds you plan to attach are powered off and
cannot be switched on while you are working.
6. Remove the insulation from the ends of the power cables.
7. Crimp the ends of the power cables.
8. Loosen the screws on both sides of the pluggable screw terminals.
64
Centellis 2000 Shelf Release 3.0 Installation and Use (6806800L99F)