Emerson Centellis 2000 Shelf Release 3.0 Manual page 131

auto - Automatic configuration of the interface
dhcp - Use DHCP to obtain an IP address
static - Use OOB_IPADDR and OOB_NETMASK to configure the interface
OOB_MODE=auto
— Static Configuration of the Out-of-band Network Interface
If using the static parameter to configure the out-of-band interface, specify the
desired IP address and netmask using the following variables:
OOB_IPADDR=
OOB_NETMASK=
Backplane Network Configuration
The backplane ethernet interfaces can be configured automatically using the Shelf
Address (default), using DHCP, or by specifying a static IP address.
Use the following parameters to the BP_A_MODE and BP_B_MODE variables to define the
interface configurations for backplane interfaces 1 and 2.
none - Do not configure the interface
auto - Automatic configuration of the interface
dhcp - Use DHCP to obtain an IP address
static - Use other parameters to configure the interface
BP_A_MODE=auto
BP_B_MODE=auto
— Static Configuration of the Backplane Network Interface
If using the static parameter to configure the backplane interfaces, specify the
desired IP addresses and netmasks using the following variables:
BP_A_IPADDR=
BP_A_NETMASK=
BP_B_IPADDR=
BP_B_NETMASK=
Backplane Virtual Interface
Centellis 2000 Shelf Release 3.0 Installation and Use (6806800L99F)
Network Management and System Access
131