System Installation
3.4.3
Removing the System
If the system is too heavy, you can remove the blades before removing the system.
The system has to be powered down before the removal (see
page
67).
Removing the System
To remove the system from a rack, proceed as follows:
1. Disconnect all power input cables.
2. Disconnect all cables from the blades, RTMs, MF106 and user cards.
3. Remove the earth ground connection.
4. Loosen and remove the mounting screws.
5. Remove the system from the rack.
70
Centellis 2000 Shelf Release 3.0 Installation and Use (6806800L99F)
Powering Down the System on