Network Management And System Access; Overview; Accessing System Components - Emerson Centellis 2000 Shelf Release 3.0 Manual

Network Management and System Access

8.1

Overview

The following sections provide information that you need after you have successfully installed
the hardware.
Section
Accessing System Components on page
117
Network Management on page 118
The information in the following subsections assumes that you have set the shelf address on
both MF106 shelf managers to the same value.
8.2

Accessing System Components

All system components are delivered with the software installed. If you want to upgrade or
need to reinstall the software on these system components, you can use the interfaces of the
MF106 to access the consoles and command line interfaces of the different system
components.
The MF106 can be reached through SSH.
user name: root
password: root
The shelf geographical address (SGA) is set during the system installation via a network
connection (see section
geographical address is 0.
The MF106 stores the shelf FRU data and the SGA persistently.
Centellis 2000 Shelf Release 3.0 Installation and Use (6806800L99F)
Description
This section contains information on which component can
be accessed via which interface.
This section contains information on the various addresses
you need to access system components.
Setting the Shelf Geographical Address on page
Chapter 8
121). The default shelf
117