Add / Solo Fader; Grand Master Fader; Rate Control - Jands Event Plus Operating Manual

1
2
14C Add/Solo fader,

Grand Master fader.

14D Rate Control

14.40 Add / Solo Fader

1
Diagram 14C
This fader controls the level of the Flash buttons.
14.50 Grand Master Fader
2
Diagram 14C
This fader controls the level of all console outputs except the Flash buttons.

14.60 Rate Control

Diagram 14D
The Rate Control scales the speed of all Chases that are running. This control should
normally be set to the mid or 12 o'clock position. Chases will then run at the speed
set in the Chase menu. Turning the control clockwise will speed the chase(s) up,
turning the control counter clockwise will slow the chase(s) down.
© Jands Electronics July 1995
Event V3 Manual 99