Setting The Chase Direction - Jands Event Plus Operating Manual

8.30 Setting the Chase Direction

Diagram 8C + 8A
1. Use the arrow buttons to move the cursor to the DR (Direction) field.
2. Press the (On) button to change the existing setting. Each press of the
(On) button changes to a new setting. Possible directions are:
* >> - Forward
* <> - Bounce
* << - Reverse
* Rn - Random
3. Press the Exit button.
NOTE:
Do NOT press the Record button if only entering or changing the Direction.
8C Setting the Chase Direction
D R
> >
< >
< <
R n
D R
> >
© Jands Electronics July 1995
Event V3 Manual 39