Adding A Dipless Crossfade Between Steps (X) - Jands Event Plus Operating Manual

Creating Memories & Chases
42 Event V3 Manual

8.60 Adding a Dipless Crossfade Between Steps (X)

Diagram 8F + 8A, 8G
1. Move the cursor to the X field and press the
crossfade on (I).
2. When X fade is turned on the attack (/) and decay (\) fields are disabled and
the menu changes to show the % (percentage) field. The % field sets what
percentage of the total crossfade time each step is fully on.
Example:
1. Set the Chase speed to 6 BPM (1 step every 10 seconds)
2. Set the % field to 50
Step 1 takes 2.5 secs to fade in, stays on for 5 secs and then takes 2.5 secs
to fade out.
TIP:
Xfade is automatically disabled at chase speeds greater 300BPM.
8F Adding a Dipless Crossfade Between Steps (X)
100%
75%
50%
25%
Level
1
8G How Crossfade works in a Chase
%
5 0
X / \
0 0 0
Dipless Crossfade
Between Steps
Step 1
2 3 4 5 6 7 8 9
Time
(On) button to turn the
%
0
F F
X %
5 0
I
Step 2
10