Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Jands JLX-LITE-MkII
Summary of Contents for Jands JLX-LITE-MkII
- Page 1 Modular Lighting Bar System JLX-LITE-MkII USER GUIDE...
- Page 2 Information contained in this user guide is subject to change without notice and does not represent a commitment on the part of the vendor. JANDS Pty Ltd shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual.
-
Page 3: Table Of Contents
USG-00000-JLXLITEMKII [1.0] TABLE OF CONTENTS INTRODUCTION ................2 Mounting Options ................. 2 Layout....................2 INSTALLATION................3 Initial Inspection ..................3 Planning - Mechanical ................3 Planning - Electrical ................4 Installation .................... 4 Perch Bar (Vertical) Installation ............6 Installation Record ................8 INSPECTION &... -
Page 4: Introduction
The Jands JLX-LITE-MkII is a universal modular wired bar system intended for fixed installations where a lighting bar with associated fixed wiring is required. Mounting Options The JLX-LITE-MkII includes many mounting holes on its top surface and is intended to be mounted is number of different ways, including: ... -
Page 5: Installation
2.4m JLX-LITE-MkII use at least 4 substantial fixings; for a 1.6 m JLX-LITE-MkII use at least 3 substantial fixings. When using less substantial fixings, for example wood screws, use at least twice the number of fixings and distribute them as evenly across the base as possible. -
Page 6: Planning - Electrical
Two or more JLX-LITE-MkIIs may be mounted end to end to create one longer bar. A single joining spigot is supplied with each JLX-LITE-MkII to end-align these bars. The spigot is not intended to carry any significant load and should not be used in lieu of fixings in the base. - Page 7 8. Run and terminate the mains wiring. The Jands JLX-LITE-MkII is supplied as a wiring enclosure for installation by a licensed electrician to AS/NZS 3000 - wire links are supplied to earth the socket outlets to a nearby tab on the chassis.
-
Page 8: Perch Bar (Vertical) Installation
Perch Bar (Vertical) Installation The JLX-LITE-MKII is not designed to resist significant end loads. A Perch Bar option allows the JLX- LITE-MkII to be mounted so the bar is on its end (90 degrees from horizontal) for Perch or Box Boom locations, but may also be used where the bars are at other angles. - Page 9 If this is the case, install any wiring that can be installed now. 6. Fit the JLX-LITE-MkII to the Perch Bar mount so that the bar slides over the integral spigot on the mount. Ensure the bar slides all the way down and is resting against the mount. If the bar does not rest against the mount, rectify the problem.
-
Page 10: Installation Record
This installation record should be filled out and signed by the person installing the lighting bar(s). Where more than one person has installed the lighting bar(s), the foreman, supervisor or similar person responsible for the works should fill out and sign this record. JANDS JLX-LITE-MkII Product Number of Bars... -
Page 11: Inspection & Maintenance
Fill out the serial numbers for the inspection/maintenance logs, then copy the pages for future use. All the records should be kept for future reference. WARNING The JLX-LITE-MkII should be regularly inspected by an ap- propriately qualified person/s JLX LITE MKII... -
Page 12: Annual Equipment Inspection/Maintenance Log
USG-00000-JLXLITEMKII [1.0] Annual Equipment Inspection/Maintenance Log JLX-LITE-MkII Product Serial Number (s) Pass Fail Action Inspect the chassis for evidence of impact damage or physical abuse Inspect electrical outlets for evidence of wear and damage ... -
Page 13: Technical Data And Specifications
IP2X * Specification only valid when the top face of the duct is horizontal in both the crosswise and longitudinal directions. This specifi- cation is reduced when the JLX-LITE-MKII is mounted at other angles. Table 4.1 – Mechanical Specifications JLX LITE MKII... -
Page 14: Rated Capacity
4.1.2 Maximum Point Load This is the maximum individual load that can be applied to a JLX-LITE-MkII. An example would be a single light attached to the Bar. Figure 4.1 –Point Load In addition, the sum of all point loads between two bar hangers must not exceed the specified maxi- mum. -
Page 15: Mounting Hole Detail
USG-00000-JLXLITEMKII [1.0] Mounting Hole Detail JLX LITE MKII...
Need help?
Do you have a question about the JLX-LITE-MkII and is the answer not in the manual?
Questions and answers