Adding Attack / Decay To The Chase - Jands Event Plus Operating Manual

8.50 Adding Attack / Decay to the Chase

Diagram 8E + 8A
1. Use the arrow buttons to move the cursor to the / (Attack) field.
2. Press the (On) button to turn Attack on (I). Press the
it off (0).
3. Use the arrow buttons to move the cursor to the \ (Decay) field.
4. Press the (On) button to turn Decay on (I). Press the
it off (0).
5. Press the Exit button.
TIP:
Do NOT press the Record button if only entering or changing the Attack / Decay
settings.
/ \
0 0
8E Adding Attack / Decay to the Chase
/ \
0 0
/ \
0 0
I
© Jands Electronics July 1995
(Off) button to turn
(Off) button to turn
/ \
0 0
I
Event V3 Manual 41