File; Saving A File; Loading A File - Jands Event Plus Operating Manual

Managing Memories & Chases
68 Event V3 Manual
11.00 Files
The previous section described how to assign Memories, Chases and Stacks to the
Assign faders. However, assigning items one at a time is slow and after you have
set up the faders for a particular song or part of the show you will want to save those
settings for easy recall later.
Files are just like Pages except that, while the makeup of a Page is factory set, a
File can contain any combination of Memories, Chases and Stacks.
The steps involved in saving and loading Files are described below.

11.10 Saving a File

Diagram 11A + 11C
Ensure that the Assign Masters are loaded with Memories, Chases and Stacks as
you require.
Press the File button.
1
Use the keypad or
2
Use the arrow buttons to move the cursor to the SAVE field.
3
Press the ON (+) button to save the file.
4

11.20 Loading a File

Diagram 11B
Press the File button.
1
Use the keypad or ON (+)/OFF (-) buttons to enter a File number (0 - 25).
2
Use the arrow buttons to move the cursor to the LOAD field.
3
Press the (On) button.
4
The Assign Masters are loaded with the Memories, Chases and Stacks that were
previously saved in the File.
TIP:
If Freeze is on, any Assign faders that were above zero% when the File was
changed will continue to control the old Memory / Chase until the faders are
returned to zero, at which time they will join the new File.
(On)/ (Off) buttons to enter a File number (0 - 25).