Adding Delay Times To A Chase - Jands Event Plus Operating Manual

Managing Memories & Chases
82 Event V3 Manual
12.42 Adding Delay Time to a Chase
Diagram 12J
Press the Chase button.
1
Enter the required Chase number (0-999) using the numeric keypad or alter-
2
natively use the
number.
Move the cursor to the MORE field, and keep moving the cursor to the
3
DELAY field after the MORE window of Chase opens.
4
Enter a Delay time of up to 99 minutes 59 seconds using the numeric keypad
or alternatively use the
Press the Exit button to close the window and return to the standard window.
5
(To use the Assign Masters to control a Stack see Section 13.00)
(On)/ (Off) button to change the displayed Memory
(On)/ (Off) button to change the existing value.