Jands Event Plus Operating Manual page 108

Advanced Features
Example 1:
When shipped from the factory the Event Plus has the EDIT
PAGE menu set as described below. The makeup of each Page
will be:
Page # Assign Faders
0 1 - 20
21
1 1 - 20
21
2 1 - 20
21
10 1 - 20
21
Example 2:
The Number of Memories can be changed to suit particular
applications. A show might call for a number of Stacks and
Chases to be permanently set on Assign faders 12 - 24. In this
case the operator can set the number of Memories per Page
to 10 with an Increment of 10. The Auto Chase load is left on
in this example - note that it loads on the next fader after the
last memory.
Page # Assign Faders
0 1 - 10
11
1 1 - 10
11
2 1 - 10
11
10 1 - 10
11
108 Event V3 Manual
Control
Memories 0 - 19
Chase 0
Memories 20 - 39
Chase 1
Memories 40 - 59
Chase 2
Memories 200 - 219
Chase 10
Control
Memories 0 - 9
Chase 0
Memories 10 - 19
Chase 1
Memories 20 - 29
Chase 2
Memories 100 - 119
Chase 10
Example 3:
The Increment between the first Memory of each Page can be
changed to suit a particular numbering scheme or to allow
overlapping Pages. In this case Memories per Page has been
set to 20 and the Increment to 100. Chase is on Auto.
Page # Assign Faders
0 1 - 20
21
1 1 - 20
21
2 1 - 20
21
5 1 - 20
21
NOTE
: If the CHS: field is changed from AUTO to OFF, no Chases
are loaded with each Page.
15.42 Restoring the Factory Settings for Page
To restore the default settings for EDIT PAGE :
1. Press the Edit button.
2. Press the Page Button.
3. Move cursor to the RESTORE field.
4. Press the (On) button to set the restore function
"ON".
5. Press Exit to return to the standard screen.
Control
Memories 0 - 19
Chase 0
Memories 100 - 119
Chase 1
Memories 200 - 229
Chase 2
Memories 500 - 519
Chase 10