Changing The Next Field - Chase - Jands Event Plus Operating Manual

Table of Contents

Advertisement

Managing Memories & Chases
74 Event V3 Manual

12.22 Changing the NEXT Field - Chase

Diagram 12F
Press the Chase button.
1
2
Enter the required Chase number (0 - 999) using the numeric keypad or
alternatively use the
number.
Move the cursor to the MORE field and keep moving the cursor to the NEXT
3
field after the MORE window of Chase opens.
Enter the number of the Chase which is to follow this Chase.
4
Press the Exit button if no more Chases are to be set.
5
NOTE:
Do NOT press the Record button if only entering or changing the NEXT field.
TIP:
If in the Chase menu you want to change the setting from a Chase number to a
Memory, use the left arrow button to move the cursor over the C and then press
the
(On) button to change the C to a M, (this can also be achieved by pressing
the flash button marked M).
(On)/ (Off) buttons to change the displayed Chase

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Event Plus and is the answer not in the manual?

Table of Contents