Adding Fade Times To A Chase - Jands Event Plus Operating Manual

Managing Memories & Chases
78 Event V3 Manual

12.32 Adding Fade Times to a Chase

Diagram 12H
Press the Chase button.
1
Enter the required Chase number (0 - 999) using the numeric keypad or alter-
2
natively use the
Move the cursor to the MORE field, and keep moving the cursor to the
3
INFADE field after the MORE window of Chase opens.
Enter an Infade time of up to 99 minutes 59 seconds using the numeric
4
keypad or alternatively use the
ing value.
Use the arrow buttons to move the cursor to the OUTFDE (Outfade) field.
5
Enter an Outfade time of up to 99 minutes 59 seconds using the numeric
6
keypad or alternatively use the
ing value.
7 Press the Exit button if no more Chases are to be set.
NOTE:
Do NOT press the Record button if only entering or changing the fade times.
(On)/ (Off) button to change the displayed number.
(On)/ (Off) button to change the exist-
(On)/ (Off) button to change the exist-