Method 1: Record And Point - Jands Event Plus Operating Manual

Creating Memories & Chases
28 Event V3 Manual
7.12 METHOD 2: Using the Menu
Diagram 7B
Press the Memory button.
1
Use the Preset faders (and any other console controls) to set up the lighting
2
output required.
3 Enter the Memory number (0 - 999) to be recorded using the numeric keypad
or alternatively use the
Memory number.
NOTE:
The cursor automatically moves to the Label field if a three digit number is
entered.
Press the Record button (a message displays on the LCD shows the per-
4
centage of available memory space that has been used and how much
remains).
Another Memory can now be recorded by repeating steps
5
(see Note below).
Press the Exit button if no more Memories are to be recorded.
6
NOTE:
The number in the Memory menu automatically advances by 1 when the Record
button is released. This allows a number of Memories to be recorded without
leaving the Memory menu.
(On)/ (Off) buttons to change the displayed
, and 4
2 3