Advanced Desk Options; Setting Default Infade And Outfade Times - Jands Event Plus Operating Manual

Advanced Features
120 Event V3 Manual
19.00

Advanced Desk Options

19.10 Setting Default Infade and Outfade Times

Diagram 19A
Before recording Memories that will be used in a crossfade Stack it can be
convenient to set default fade times to avoid the necessity of setting times for each
Memory.
Note:
Default times will only be added to new Memories. It is possible to change the
setting for any Memory later.
Press the Setup button to open the Setup menu.
1
Move the cursor to the PREF (Preferences) field.
2
Press the (On) button to open the Set Preferences menu.
3
Move the cursor to the TIMES field and set a time in the format MM:SS or
4
M:SS.s (M=minute, S=seconds, s = tenths of a second).
5 Press Exit to close this menu (press Exit several times to close all menus).