Method 2: Using The Menu - Jands Event Plus Operating Manual

Creating Memories & Chases
34 Event V3 Manual

7.42 METHOD 2: Using The Menu

Diagram 7E
Press the Edit button.
1
Press the Memory button. Enter the Memory number (0 - 999) to be
2
edited.
3 Move the cursor to the CH# (channel) field. Use the
or keypad to enter the new channel number.
Move the cursor to the TO# field. Use the
4
to enter the new number for the range of channels to be edited.
Move the cursor to the AT (value) field. Use the
5
keypad to enter the new level values.
Example:
In the menu illustrated in diagram 7E channels 10 through to 15 have been
set to 50%.
TIP:
As each channel or group of channels is adjusted, using either edit method, the
changes are stored temporarily so there is no need to press Record to save each
individual change.
Press the Record button. The LCD will display the percentage of available
6
Memory space which has been used and remains, and will then return to the
standard screen after the button is released.
(On)/ (Off) button
(On)/ (Off) button or keypad
(On)/ (Off) button or