Copying A Chase; Copying A Patch - Jands Event Plus Operating Manual

Advanced Features
132 Event V3 Manual

22.20 Copying a Chase

Diagram 22B
1 Press the Clear button to open the Clear/Copy menu.
Note:
Move the cursor to the FUNCTION: field and press the
field from Copy to Clear if necessary.
Move the cursor to the CHSE (Chase) field
2
Press the (On) button to open the Copy Chase menu.
3
Move the cursor to the CHS:(Chase:) field (the number of the Chase to be
4
copied).
Set the Chase number to be copied.
5
Move the cursor to the TO: field (the number of where the chase is to go).
6
Set the new Chase number.
7
Move the cursor to the CONFIRM field.
8
9 Press the (On) button to copy the chase.
Example:
Diagram 22B shows Chase 1 being copied to Chase 10.
(On) button to toggle the