Intervals - Beckhoff AMI8100 Operating Instructions Manual

Intervals

11.2
Component Interval
Ball bearing 30000 operating hours
Servo drive 2500 operating hours/an-
nually
Shaft sealing ring 5000 operating hours
Cables Regular intervals
5 million bending cycles
Sockets 500 cycles
Version: 1.0
Under nominal conditions, the motor components have different op-
erating hours. We have provided you with a list of maintenance work
and intervals for the associated components below:
Maintenance
Replace bearing
Check servo drive for bearing noises
If noises are detected:
do not continue to operate the servo drive; replace bear-
ing
Perform visual inspection
Lubricate the shaft sealing ring
Recommended lubricants:
„MobilgreaseTM FM22" from Mobil
In case of damage and pressure drop:
Replace shaft sealing ring
Perform visual inspection and check for damage
If required:
Replace cables
Replace cables
In case of damage:
Contact Beckhoff Service
AMI8100
Maintenance and cleaning
─── 53