For Your Safety; Safety Pictograms - Beckhoff AMI8100 Operating Instructions Manual

Compact integrated servo drives

Hide thumbs Also See for AMI8100:

Table of Contents

2.1

Version: 1.0

Read this chapter containing general safety information. The chap-

ters in these operating instructions also contain warning notices. Al-

ways observe the safety instructions for your own safety, the safety

of other persons and the safety of the product.

When working with control and automation products, many dangers

can result from careless or incorrect use. Work particularly thor-

oughly, not under time pressure and responsibly towards other peo-

ple.

Beckhoff products feature safety pictograms, either on stickers or

printed, which vary depending on the product. They serve to protect

people and to prevent damage to the products. Safety pictograms

must not be removed and must be legible for the user.

Warning of a hot surface

During and after operation there is a risk of burns at the housing due

to hot surfaces over 60 °C. Allow the housing to cool down for the

specified time, at least 15 minutes.

Avoid shocks to the shaft

Impacts on the shaft may cause the maximum permissible axial and

radial values to be exceeded. Encoder systems can thus be de-

stroyed.

AMI8100

For your safety

───

Table of Contents