Long-Term Storage - Beckhoff AMI8100 Operating Instructions Manual

Transport and storage

Long-term storage

6.3
34 ───
Observe the maximum storage time
Do not exceed the maximum storage time of two years.
Exceeding the specified maximum storage time can lead to
changes in the properties of the lubricant used and damage the
servo drive during subsequent operation.
Perform recurring inspections
Check the servo drive every six months to ensure it is in good con-
dition.
Damage to the servo drive or maintenance work not carried out will
affect the service life of the installed components and parts.
Prevent the formation of condensation
Keep the ambient temperature constant. Avoid solar radiation and
high air humidity.
Condensation water can lead to damage during subsequent opera-
tion or to rust formation.
The servo drives can be stored for shorter or longer periods. For
storage we always recommend the original packaging. Adhere to
the conditions specified in the chapter: "Transport and storage",
[Page 32].
The servo drives are protected against chemical and aggressive
substances through the classes 1C2, chemical substances and 1B2,
biological conditions.
Ensure the storage space is vibration-free.
AMI8100 Version: 1.0