Data For Operation And Environment - Beckhoff AMI8100 Operating Instructions Manual

Technical data
Data for operation and
4.2
environment
Environmental requirements
Climate category - operation
Ambient temperature during operation
Ambient temperature during transport
Ambient temperature during storage
Permissible humidity in operation
Permissible humidity during transport and
storage
Specifications for intended use
Cooling
Degree of protection
Feedback system
Vibration resistance
Shock resistance
EMC requirements
Approvals
26 ───
Beckhoff products are designed for operation under certain environ-
mental conditions, which vary according to the product. The follow-
ing specifications must be observed for operation and environment
in order to achieve the optimum service life of the products.
Operate servo drives only under the specified environmental
conditions
Operate the servo drives only in accordance with the specifications
for operation and the environment listed in this chapter. This en-
sures a long service life and proper operation.
Temperatures above 40 °C and encapsulated installation can
shorten the service life of the servomotor.
2K3 according to EN 60721
0 °C to +40 °C, extended temperature range
-25 °C to +70 °C, maximum fluctuation 20 K/hour
-25 °C to +70 °C, maximum fluctuation 20 K/hour
5 % to 95 % relative humidity, no condensation
5 % to 95 % relative humidity, no condensation
Convection
Housing: IP54
Shaft feedthrough: IP20 in mounting position V3 / IP54
Shaft feedthrough with double-lipped FKM shaft seal ring: IP65
Absolute encoder, single-turn and multi-turn encoder
conforms to EN 60068-2-6
conforms to EN 60068-2-27
Conforms to EN 61000-6-2 and EN 61000-6-4
CE,
cURus
EAC
See chapter: Guidelines and Standards
AMI8100 Version: 1.0