Table of Contents
Advertisement
Ordering options
3.4
Feather key
3.4.1
Holding brake
3.4.2
Version: 1.0
Ordering options are defined via the type key. The listed compo-
nents cannot be retrofitted.
3.4.1
A feather key transmits torque to an output element.
The servo drives are available with feather key groove and inserted
feather key according to DIN6885/ISO2491. The rotor is balanced
with half a feather key according to DIN ISO 21940-32:2012-08.
3.4.2
A holding brake blocks the rotor in the de-energized state. The hold-
ing brake increases the motor length and the rotor moment of iner-
tia. The holding brake cannot be retrofitted and is mounted on the B
bearing side of the servo drive.
AMI8100
Product overview
───
21
Advertisement
Table of Contents
