Datalogic DeviceNet AMT58 Series Instruction Manual page 8

AMT58x-DN DeviceNET®
 Install the device following strictly the information in the section "3
– Mounting instructions";
 mechanical installation has to be carried out with stationary
mechanical parts;
 do not disassemble the encoder;
 do not tool the encoder or its shaft;
 delicate electronic equipment: handle with care; do not subject
the device and the shaft to knocks or shocks;
 respect
the
manufacturer;

solid shaft: use a flexible coupling to connect the encoder to
motor shaft. Make sure the misalignment tolerances of the flexible
coupling are respected.
2
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Mechanical safety
environmental characteristics declared by