Datalogic DeviceNet AMT58 Series Instruction Manual page 38

AMT58x-DN DeviceNET®
10h
13h
14h
15h
16h
20h
For any further information on general error codes refer to the
publication "The CIP Networks Library. Volume I. Common Industrial
Protocol (CIP™)".
32
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Device state conflict
Not enough data
Attribute not supported
Too much data
Object does not exist
Invalid parameter
The device's
mode/state prohibits
execution of the requested
service.
The service did not supply
enough data to perform the
specified operation.
The attribute specified in the
request is not supported.
The service supplied more
data than was expected.
The object specified does not
exist in the device.
A parameter associated with
the request was invalid. This
code is used
parameter does not meet the
requirements of
specification and/or
requirements defined in an
Application
Specification.
current
the
when a
this
the
Object