Class 2Bh: Acknowledge Handler Object; 01-01 Acknowledge Timer; 01-02 Retry Limit; 01-03 Connection Instance Of Cos - Datalogic DeviceNet AMT58 Series Instruction Manual

6.5.5 Class 2Bh: Acknowledge Handler Object

This class is meant to manage the receipt of acknowledgement
messages.
Supported Service code:
0Eh = Get_Attribute_Single: used to read connection class attribute
value.
10h = Set_Attribute_Single: used to write connection class attribute
value.
Supported Instance: 01h = Explicit Message
2B-01-01 Acknowledge timer
[UINT, rw]
After a Master request, Slave waits for the set acknowledgement
time before sending back a reply.
Default = 10h: 16ms
2B-01-02 Retry Limit
[USINT, rw]
Number of Ack Timeouts after which the application informs the
Master that a RetryLimit_Reached event occurred.
2B-01-03 Connection Instance of COS
[UINT, rw]
Connection Instance which contains the path where the Ack Handler
events will be notified.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
AMT58x-DN DeviceNET®
49