Datalogic DeviceNet AMT58 Series Instruction Manual page 23

Example
Parameter 16:
16 Data Tx in Poll mode
Parameter 17:
17 Data Tx in COS/Cyclic mode
Set scanner module parameters accordingly:
For any further information on the scanner module parameters refer
to section "5.5 Using scanner module".
Click Upload button to upload and read the current
configuration.
Click Download button to send the new parameters to the
encoder.
NOTE
If 20 Auto-save parameters
saved automatically; otherwise if
must start manually the "save parameters" procedure; see section
"5.4 Save parameter with RSNetWorx".
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
AMT58x-DN DeviceNET®
= "Position Value + Velocity"
(position and velocity)
= "Position Value" (position)
= YES, new parameters values are
20 Auto-save parameters = NO, you
17