Datalogic DeviceNet AMT58 Series Instruction Manual page 22

AMT58x-DN DeviceNET®
Open the Parameters page of the Properties window if you need to
read, set and save the encoder parameters.
Please pay particular attention to parameters 16 Data Tx in Poll
mode, 17 Data Tx in COS/Cyclic mode and 20 Auto-save
parameters.
Parameters 16 Data Tx in Poll mode and 17 Data Tx in COS/Cyclic
mode must be set in accordance with the scanner module settings (si
see section "5.5 Using scanner module").
16
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com