05-Inst-07 Produced Connection Size; 05-Inst-08 Consumed Connection Size; 05-Inst-09 Expected Packet Rate; 05-Inst-0C Watchdog Time-Out Action - Datalogic DeviceNet AMT58 Series Instruction Manual

05-Inst-07 Produced connection size

[UINT, ro]
Maximum number of bytes transmitted in this connection.

05-Inst-08 Consumed connection size

[UINT, ro]
Maximum number of bytes received in this connection.

05-Inst-09 Expected packet rate

[UINT, rw]
This attribute is meant to set the time between two subsequent "I/O
message" transmissions (Transmission Trigger Timer) and the
Inactivity/Watchdog Timer.

05-Inst-0C Watchdog time-out action

[USINT, ro]
This attribute defines the action the Connection Object should
perform when the Inactivity/Watchdog Timer gap has expired.
Default = 01h: the Connection Class automatically closes the
connection after the Inactivity/Watchdog Timer gap has expired.

05-Inst-0D Produced connection path length

[UINT, ro]
This attribute specifies the number of bytes the
connection path

05-Inst-0E Produced connection path

[EPATH, ro]
This attribute is fitted with a byte stream which defines the
Application Object(s) whose data is to be produced by this
Connection Object.

05-Inst-0F Consumed connection path length

[UINT, ro]
This attribute specifies the number of bytes the
connection path
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
attribute is fitted with.
attribute is fitted with.
AMT58x-DN DeviceNET®
05-Inst-0E Produced
05-Inst-10 Consumed
41