Deleting A Custom Image File; Forced File Load - Barco MCM-100S User Manual

3. Confirm by pressing ENTER.
The selected file name appears in the edit box at the bottom of the dialog box.
4. In the edit box, enter the name of the new file by changing the original file name.
5. Confirm by pressing ENTER.
6. Exit the menu.
10.9.6 Deleting a Custom Image file
Description
Any Custom Image file can be deleted. It is also possible to delete all Custom Image files at once.
Deleting one Custom Image file or all
1. In the OSD, navigate to Image files > Delete... and press ENTER to select.
Image 10-72
2. In the list of the dialog box, navigate to the Custom Image file to be deleted or to All custom files.
Image 10-73
3. Confirm by pressing ENTER.
Image 10-74
4. A confirmation request window appears:
- press ENTER to confirm;
- press BACK to return.
5. Exit the menu.
10.9.7 Forced file load
Introduction
Forced file load is used to force a certain Custom Image file to be loaded when the source on a specified input connector is selected
to be displayed. Whatever the source signal is like, the forced Image file will be used to display it.
R5905187 MCM-100S 05/06/2012
10. Basic operation
79