Barco MCM-100S User Manual page 120

12. Expert operation
y
0.8
G
0.6
0.4
0.2
B
0
0 0.2
Image 12-22
Color triangle: native color gamut of a display
Dynacolor can be used to create a color triangle which is slightly different from (and smaller than) the original color triangle of the
display. The coordinates of the desired color triangle (R, G, B and W) are stored in a Dynacolor set. Activating a Dynacolor Set
enables the corresponding color triangle, resulting in a different color reproduction.
y
0.8
0.6
0.4
0.2
0
0 0.2
Image 12-23
Color triangle: Dynacolor set of a display
A Native color triangle
B Dynacolor set
Expert use: fine tuning colors
If the color impression of a channel in a multiple channel display system is slightly different from the color impression of the other
channels, you can manually fine tune the desired X and Y value of the white point in the active Dynacolor set of the MCM-100S
of that channel to match its colors to the colors of the other channels. Always keep the CIE chromaticity diagram in mind while
changing the white point position:
116
W
R
0.4 0.6
A B
0.4 0.6
x
0.8
x
R5905187 MCM-100S 05/06/2012