Barco MCM-100S User Manual page 47

Image 7-15
2. In the dialog box that appears, select the Hostx checkbox and press ENTER .
Note: x represents the number of the Hosts.
The IP address edit box is enabled.
3. Fill in the IP address or Hostname of the Slave MCM-100S.
Image 7-16
Note: To clear an IP address or Host name from the edit box, click the C button.
4. Set the Dynacolor checkbox if the color settings of the Slave MCM-100S should be controlled by the master during color align-
ment.
Setting an MCM-100S to be Slave
1. In the OSD of the MCM-100Ss to be Slave, navigate to Installation > Linked devices... and press ENTER to select.
R5905187 MCM-100S 05/06/2012
7. Setup and configuration
43