Barco MGP D5 Dicom Theater Lite Installation & User Manual
  1. Manuals
  2. Brands
  3. Barco Manuals
  4. Projector
  5. MGP D5
  6. Installation & user manual
Barco MGP D5 Dicom Theater Lite Installation & User Manual

Barco MGP D5 Dicom Theater Lite Installation & User Manual

Hide thumbs Also See for MGP D5 Dicom Theater Lite:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
MGP D5 Dicom Theater Lite
Installation & User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MGP D5 Dicom Theater Lite and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Barco MGP D5 Dicom Theater Lite

Summary of Contents for Barco MGP D5 Dicom Theater Lite

  • Page 1 MGP D5 Dicom Theater Lite Installation & User Manual...

  • Page 2: Copyright Notice

    - graphical, electronic, or mechanical including photocopying, taping or information storage and retrieval systems - without written permission of Barco © 2004 Barco N.V. All rights reserved. MGP D5 Dicom Theater Lite...
  • Page 3 Copyright notice (This page intentionally left blank.) MGP D5 Dicom Theater Lite...

  • Page 4: Table Of Contents

    Windows 2000 BarcoMed 2MP2CP software installation ....37 Display Controller Tools ............47 Barco Display Tab................49 Introduction ................49 Using the Barco Display Tab ............50 BarcoMed Driver Tab ................. 52 Introduction ................52 Using the BarcoMed Driver Tab ..........52 Status ..................
  • Page 5 Barco DPMS Screen Saver ..............65 Introduction ................65 Barco DPMS Screen Saver Options..........65 Getting started with the Barco DPMS Screen Saver ....68 Using the Barco DPMS Screen Saver ......... 69 Installing or Reinstalling Barco DPMS ........73 Uninstalling Barco DPMS............

  • Page 6: Preface

    Preface MGP D5 Dicom Theater Lite...
  • Page 7 Preface (This page intentionally left blank.) (This page intentionally left blank.) MGP D5 Dicom Theater Lite...
  • Page 8 BarcoView software products are the property of BarcoView. They are distributed under copyright by Barco N.V. or BarcoView, LLC., for use only under the specific terms of a software license agreement between Barco N.V. or BarcoView LLC. and the licensee.
  • Page 9 Preface Canadian notice This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la Classe A est conforme à la norme NMB-003 du Canada. MGP D5 Dicom Theater Lite...

  • Page 10: Safety Instructions

    Safety Instructions Safety Instructions General Recommendations Read the safety and operating instructions before operating the display. Retain safety and operating instructions for future reference. Adhere to all warnings on the display and in the operating instructions manual. Follow all instructions for operation and use. Electrical shock Type of protection (electrical): Class I equipment...
  • Page 11 Safety Instructions • Power cords: Power cord with CEE 7 plug: The colors of the mains lead are colored in accordance with the following code: Green-and-yellow: Earth (safety earth), Blue: Neutral, Brown: Line Power cord with ANSI 73.11 plug: The wires of the power cord are colored in accordance with the following code: Green/yellow: ground, White: neutral, Black: line (live)
  • Page 12 Safety Instructions This apparatus conforms to: CE, IEC 60950, UL 60950, CAN/CSA C22.2 No. 60950 (c-UL), CCC. National Scandinavian Deviations for Cl. 1.7.2 : Finland: "Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan" Norway: "Apparatet må tilkoples jordet stikkontakt" Sweden: "Apparaten skall anslutas till jordat uttag" MGP D5 Dicom Theater Lite...

  • Page 13: Explanation Of Symbols

    Explanation of symbols Explanation of symbols Symbols on the display and power supply On the display or power supply, you may find the following symbols: Indicates the display is approved according to the CE regulations Indicates the display is approved according to the UL regulations Indicates the display is approved according to the c-UL regulations...

  • Page 14: Overview

    Overview MGP D5 Dicom Theater Lite...
  • Page 15 Overview (This page intentionally left blank.) (This page intentionally left blank.) MGP D5 Dicom Theater Lite...

  • Page 16: Introduction

    Introduction Introduction About the system MGP D5 Dicom Theater provides consistent image quality for consulting, reviewing and training applications. The system offers a turnkey solution, bundling high-bright medical grade projector, flat panel display, dedicated display controller and MediCal ® QA management software. MGP D5 Dicom Theater is available in single- head and dual - head configurations.

  • Page 17: Other Relevant Documentation

    Introduction done by means of the I-Guard® optical sensor, incorporated in the bezel of the display. The MediCal Pro software is used for defining the Preset the display devices must be conform to and calibrate them to make them conform to the Preset. The TheaterWatch software is a systray tool normally operating in background, which enables you to calibrate the projector(s) based on a visual algorithm.

  • Page 18: Quick Installation Overview

    Quick installation overview Quick installation overview MGP D5 Dicom Theater installation overview To install the MGP D5 Dicom Theater system completely, you have to follow these steps: 1. Install the BarcoMed display controller(s) in the PC. For more information, please refer to the section about the “Display controller installation”.
  • Page 19 Quick installation overview a) Single-head with 1 display and 1 projector Video2 (Head2) Video1 (Head1) Video1 Video2 Video1 Video2 BAR CO Figure 1 Proceed as follows: 1. Connect PC output video2 to the projector VGA input by means of the DVI-to-VGA cable (15 m / 50 ft). 2.
  • Page 20 Quick installation overview b) Single-head with two projectors Video2 (Head2) Video1 (Head1) Video1 Video1 Video2 Video2 Figure 2 Proceed as follows: 1. Connect one PC video output to the first projector’s VGA input by means of a DVI-to-VGA cable (15 m / 50 ft). 2.
  • Page 21 Quick installation overview c) Dual-head with two displays and two projectors Video2 (Head2) Video1 (Head1) BAR CO Video1 Video2 Video3 Video4 Video4 (Head4) Video3 (Head3) Video1 Video2 BAR CO Figure 3 Proceed as follows: 1. Connect PC output video2 to the first projector’s VGA input by means of a DVI-to-VGA cable (15 m / 50 ft).
  • Page 22 Quick installation overview 2. Connect PC output video1 to the first display’s DVI video input by means of a DVI-to-DVI cable. 3. Connect PC output video4 to the second projector’s VGA input by means of a DVI-to-VGA cable (15 m / 50 ft). 4.
  • Page 23 Quick installation overview e) Dual-head with two displays and one projector BAR CO Video2 (Head2) Video1 (Head1) Video1 Video2 Video3 Video4 Video4 (Head4) Video1 Video3 (Head3) Video2 BAR CO Figure 4 Proceed as follows: 1. Connect PC output video2 to the first display’s DVI video input by means of a DVI-to-DVI cable.
  • Page 24 Quick installation overview 4. Connect PC output video3 to the second display’s DVI video input by means of a DVI-to-DVI cable. Important: Do not connect the two display inputs nor the two projector inputs to the same display controller. In other words, to each display controller, a display input and a projector input must be connected.
  • Page 25 Quick installation overview (This page intentionally left blank.) MGP D5 Dicom Theater Lite...

  • Page 26: Display Controller Installation

    Display Controller Installation MGP D5 Dicom Theater Lite...
  • Page 27 Display Controller Installation (This page intentionally left blank.) (This page intentionally left blank.) MGP D5 Dicom Theater Lite...

  • Page 28: Barcomed 2Mp2Cp Overview

    BarcoMed 2MP2CP Overview BarcoMed 2MP2CP Overview The BarcoMed 2MP2CP Display Controller delivers a quality image with 24-bit True Color for medical viewing applications. Minimum system requirements • Pentium 4 or compatible processor • 256MB of system memory (minimum) for optimum performance consult your application provider for their recommended minimum system memory requirements •...
  • Page 29 BarcoMed 2MP2CP Overview • Displays VGA boot messages on MGP D5 Dicom Theater displays. Supported resolutions The following resolution is available on both heads prior to installing the driver or when the operating system is booted in VGA mode. • 640x480 @ Default Refresh Rate, 16 colors The following resolutions are available on each head of the BarcoMed 2MP2CP display controller.

  • Page 30: Display Controller Installation

    Display controller installation Display controller installation Caution: Wear a grounded, protective ESD strap during installation or handling of the display controller. Electrostatic charges can damage the display controller. Prior to installing your BarcoMed 2MP2CP display controller(s) in your PC please take a few minutes to familiarize yourself with both the display controller(s) and the PCI slots in your computer.
  • Page 31 Display controller installation figure 6 below). By default, VGA should be enabled, switch 1 on and switch 2 off. If you decide to use a separate VGA monitor as your boot monitor, you must disable the BarcoMed 2MP2CP’s on- board VGA capabilities by changing the switch settings to switch 1 off and switch 2 on.
  • Page 32 Display controller installation Figure 7: PCI and RAID Controller Slots Installing the BarcoMed 2MP2CP display controller Install the BarcoMed 2MP2CP controller in your computer following these steps: 1. Turn off the power to your computer and disconnect the power cord, however make sure that the computer chassis is still grounded.
  • Page 33 Display controller installation 6. Connect the primary display to the connector marked “VID 1” on the BarcoMed 2MP2CP display controller using the provided DVI cable (see figure 8). For a dual-headed BarcoMed 2MP2CP setup, connect the secondary display to the other connector on the display controller. 7.

  • Page 34: Display Controller Software Installation

    Display Controller Software Installation MGP D5 Dicom Theater Lite...
  • Page 35 Display Controller Software Installation (This page intentionally left blank.) (This page intentionally left blank.) MGP D5 Dicom Theater Lite...

  • Page 36: Windows 2000 Barcomed 2Mp2Cp Software Installation

    (if any) to the BarcoMed 2MP2CP display controller(s) and power supply(s). 3. Decide if you want to install the Barco DPMS Screen Saver Software in addition to the driver. (See “Barco DPMS Screen Saver” on page 65 for a description of this add-on feature.) 4.
  • Page 37 Windows 2000 BarcoMed 2MP2CP software installation Windows stops launching the “Found New Hardware Wizard”. Please be patient as this may take several minutes while Windows scans its library of Plug-and-Play device drivers to see if it has a driver for your BarcoMed 2MP2CP controller.
  • Page 38 Windows 2000 BarcoMed 2MP2CP software installation Figure 9 If it determines that the Microsoft Installer is either out of date or missing, it will display the screen shown in figure 10 below. Click “OK” to continue, the wizard will then install a newer version of the Microsoft Installer.
  • Page 39 Windows 2000 BarcoMed 2MP2CP software installation Hardware Wizard - Video Controller”. Again, please be patient as Windows will again scan its library of Plug-and- Play device drivers to see if it has a driver for your BarcoMed 2MP2CP controller. The BarcoMed Software Install Wizard will automatically restart and the BarcoMed Product Installation Wizard’s welcome screen will again be displayed (figure 11 below).
  • Page 40 Windows 2000 BarcoMed 2MP2CP software installation your BarcoMed Software CD. Select the device you want to install and then click “Next”. Note: If there are no BarcoMed devices installed, or if Windows does not recognize the installed devices, or if the driver on your BarcoMed Software CD does not support the installed devices, the dialog box will be empty , and the...
  • Page 41 Windows 2000 BarcoMed 2MP2CP software installation Figure 13 Click “OK” to install the new driver. If you don’t want to replace the exiting driver, click “OK” and then click “Cancel”. 7. The “Device Confirmation” screen displays the device driver that will be installed. If you want to change your selection, click “Back”...
  • Page 42 Windows 2000 BarcoMed 2MP2CP software installation Figure 15: Windows XP Windows Logo Testing Warning 9. When the screen shown in figure 16 below appears decide if you want the driver to install with Cloned Heads mode enabled or disabled, then click “Next”. Figure 16 When the Driver Install Wizard tells you that it has successfully installed the selected driver, click “Finish”.
  • Page 43 “Barco monitor plug and play software” below. Note: Clicking “Cancel” will also return you to the BarcoMed Product Install Wizard, but will not delete the Barco display driver. The wizard will also begin to install the next selected piece of BarcoMed Software.
  • Page 44 Figure 18: Windows XP Windows Logo Testing Warning The Barco Monitor Plug and Play software should automatically set the resolution for the Barco LCD displays of your MGP D5 Dicom Theater System. However, you may need to set the resolution for your MGP D5 and any non-Barco flat panel displays or CRT type monitors that are connected to your BarcoMed 2MP2CP controller.
  • Page 45 Windows 2000 BarcoMed 2MP2CP software installation D5 or your displays active. To make your MGP D5 or your displays active you must extend your desktop to these displays using the “Windows Display Control Panel”. If for some reason Windows failed to correctly set the resolution of your MGP D5 or displays please turn to the section “Setting the resolution of your MGP D5 Dicom Theater display”...

  • Page 46: Display Controller Tools

    Display Controller Tools MGP D5 Dicom Theater Lite...
  • Page 47 Display Controller Tools (This page intentionally left blank.) (This page intentionally left blank.) MGP D5 Dicom Theater Lite...

  • Page 48: Barco Display Tab

    Barco Display Tab Barco Display Tab Introduction The Barco Display Tab is used for gathering information about the BarcoMed Flat Panel Display(s). To access the Barco Display Tab do the following: 1. Open the “Display Properties Control Panel” by right clicking on the desktop, then select “Properties”.

  • Page 49: Using The Barco Display Tab

    When running DualView under Windows 2000 and Windows XP the desktop must be extended to include each display, otherwise those outputs will not be visible to the Barco Display Tab. Hovering the cursor over a display icon will pop up a window with information that identifies the display.
  • Page 50 Barco Display Tab Firmware Revisions: This is the runtime firmware that is loaded in the display. This information may be helpful when there is a problem. Internal Temperature: This is the temperature inside the display. It starts out at about the ambient temperature when the display backlight is first turned on, then rises slowly to a steady-state temperature as the display warms up.

  • Page 51: Barcomed Driver Tab

    “Properties”. 2. Under Windows 2000 or Windows XP, click on “Settings” tab. Double click on the rectangle that represents the Barco display whose settings you wish to change to bring up its property page. Click on the “BarcoMed Driver” tab (see figure 21 on page 53).

  • Page 52: Status

    BarcoMed Driver Tab Figure 21: BarcoMed Driver Tab under Windows 2000 and Windows XP Status The Status section displays information about the current BarcoMed display controller, driver, and the currently selected display resolution. Graphics Board This displays the current BarcoMed display controller. Driver Version This displays the current BarcoMed driver version.

  • Page 53: Monitor Configuration

    BarcoMed Driver Tab Resolution This displays the currently selected display resolution. Monitor Configuration If the options in this section are grayed out, then they are not available for the model controller with which you are working. For the BarcoMed 2MP2CP, the Monitor Configuration pull-down menu allows you to select DualView operation or Cloned Heads operation.

  • Page 54: Barcomed Hardware Tab

    BarcoMed Hardware Tab BarcoMed Hardware Tab Introduction The BarcoMed Hardware Tab is used for gathering information about BarcoMed display controller(s). For all BarcoMed display controller(s) it will display PCI information. For BarcoMed display controller(s) based on the AURA video chipset it will also display information about the Firmware installed on the board.

  • Page 55: Using The Barcomed Hardware Tab

    BarcoMed Hardware Tab Table 1: BarcoMed AURA Non-AURA Hardware Tab Controllers Controllers Support PCI and Firmware BarcoMed 3MP2FH Information BarcoMed 5MP1H PCI Information Only PCI and Firmware BarcoMed 5MP1HM Information BarcoMed 5MP2 PCI Information Only BarcoMed PCI and Firmware 5MP2 AURA Information PCI and Firmware BarcoMed...
  • Page 56 BarcoMed Hardware Tab Figure 22 BarcoMed Hardware Tab under Windows 2000 or Windows XP Device Displays the current BarcoMed display controller, driver, and the currently selected display resolution. Information Device ID: Displays the device’s PCI Device ID number. Vendor ID: Displays the device manufacturer’s PCI Vendor ID number.
  • Page 57 “Generate Report” Button: Clicking this button will launch the BarcoMed Self Exam utility. BarcoMed Self Exam is an automated Barco Diagnostic Tool that is used to gather the information that support engineers and technicians need to help determine the root cause of a customer problem.
  • Page 58 Customer Diagnostic Questions Screen This screen allows the user to tell the Barco ImageCare team as much as possible about the problem. For the Medical Viewing Applications Running field, enter the medical applications that are currently running on the system with the problem.
  • Page 59 Submitting the Data to Barco Support Once BarcoMed Self Exam has collected the data, the user can submit it to ImageCare, Barco Medical Imaging Systems’ customer support organization by email. To do this you need a system with access to the World Wide Web.
  • Page 60 BarcoMed Hardware Tab 3. Then click on “Support” in the drop down menu. 4. Find the appropriate ImageCare Center for your country and click on the email link. 5. Enter a subject and a brief message describing the problem about which you are requesting help. 6.
  • Page 61 BarcoMed Hardware Tab MGP D5 Dicom Theater Lite...

  • Page 62: Display Tools

    Display Tools MGP D5 Dicom Theater Lite...
  • Page 63 Display Tools (This page intentionally left blank.) (This page intentionally left blank.) MGP D5 Dicom Theater Lite...

  • Page 64: Barco Dpms Screen Saver

    Note: The Barco DPMS Screen Saver will not control any displays connected to a non-Barco display controller. The default state for the Barco DPMS Screen Saver is the Off state. In addition to simply entering the Off state after the work day, the user can specify that the display first go through two other DPMS Screen Saver states before going into Off state.
  • Page 65 Barco DPMS Screen Saver Save As Saves your current Barco DPMS Screen Saver settings. The name you specify will appear in the Scheme list so you can easily restore these settings later. Delete Deletes the scheme that is selected in the Scheme box.
  • Page 66 Maximum Longest Monitor Settings If you have a Barco Medical Display, select “Barco Quick Start.” If a non-Barco display is being used, select the amount of time it takes your display to warm up via the “Monitor Setting” section. Contact your display vendor for this warm-up time.

  • Page 67: Getting Started With The Barco Dpms Screen Saver

    Use As Logon Screen Saver Check the box to use the Barco DPMS Screen Saver when no one is logged into the system. Uncheck the box to use the default screen saver when no one is logged into the system.

  • Page 68: Using The Barco Dpms Screen Saver

    Windows Screen Saver, each user of the system must select the Barco DPMS Screen Saver so that Windows will store the selection in the user’s profile. If a user does not select the Barco DPMS Screen Saver as his screen saver, the next time he logs on to the system the screen saver selection may be blank.
  • Page 69 Figure 23: Windows 2000 Screen Saver Tab Figure 24: Windows XP Screen Saver Tab 2. Click on the “Settings” button. The “Barco DPMS Screen Saver Control Panel” will open (see figure 25 on page 71). MGP D5 Dicom Theater Lite...
  • Page 70 Barco DPMS Screen Saver Figure 25: Barco DPMS Settings Control Panel 3. Use the default schemes by selecting one of the three default schemes. Click “OK”. Then Click “OK” again. Note: If you make any changes to any of the settings of one...
  • Page 71 Off state. 8. Select the amount of time it takes for your display to warm up. If you have a Barco Medical Display, select “Barco Quick Start”. If you are using a non-Barco display, select the MGP D5 Dicom Theater Lite...

  • Page 72: Installing Or Reinstalling Barco Dpms

    12. Click “OK” again to close the “Display Properties Control Panel”. Installing or Reinstalling Barco DPMS To install or reinstall the Barco DPMS Screen Saver insert the Software CD in the appropriate device on your computer ORONIS and run the BarcoMed Product Install Wizard (please see the section Software Installation for complete instructions).
  • Page 73 Barco DPMS Screen Saver 2. Click “Next” on the Welcome Screen of the Barco DPMS InstallShield Wizard to begin the installation. ® 3. Select the radio button next to “Remove” on the Program Maintenance screen of the Wizard and click “Next”.

  • Page 74: Medical Pro Software

    MediCal Pro Software MGP D5 Dicom Theater Lite...
  • Page 75 MediCal Pro Software (This page intentionally left blank.) (This page intentionally left blank.) MGP D5 Dicom Theater Lite...

  • Page 76: Medical Pro Installation

    MediCal Pro installation MediCal Pro installation MediCal Pro is used to calibrate and perform QA tasks on the displays in the system. It is not compatible with the MGP D5 projector. To calibrate the projector, use the TheaterWatch software. See To use TheaterWatch on page 83 To install MediCal Pro on the PC, please follow the instructions in the MediCal Pro User Guide.

  • Page 77: Using Medical Pro

    Using MediCal Pro Using MediCal Pro After installation of the hardware and software, you must start MediCal Pro to calibrate the display(s). Proceed as follows: 1. Start MediCal Pro. If appropriate, you can connect to MediCal Administrator. 2. During startup, MediCal Pro will detect the connected review display(s).

  • Page 78: Theaterwatch Software

    TheaterWatch Software MGP D5 Dicom Theater Lite...
  • Page 79 TheaterWatch Software (This page intentionally left blank.) (This page intentionally left blank.) MGP D5 Dicom Theater Lite...

  • Page 80: Theaterwatch Installation

    TheaterWatch Installation TheaterWatch Installation TheaterWatch installation 1. Insert your TheaterWatch CD into your computer’s CD drive. If the TheaterWatch installation start screen doesn’t appear within one minute, browse the contents of your TheaterWatch CD and double click on the file: “Setup.exe”. 2.
  • Page 81 TheaterWatch Installation 1. Open the command prompt (DOS window) in Windows. 2. Using DOS commands, navigate to the folder containing the TheaterWatch setup.exe file on the CD-ROM. 3. Type: “setup.exe_/s_/v/qn” (where “_” represents a space) MGP D5 Dicom Theater Lite...

  • Page 82: Using Theaterwatch

    Using TheaterWatch Using TheaterWatch Introduction Compatible displays TheaterWatch is compatible with the following Barco projectors and displays: MGP D5, MFCD 1218, MFGD 1218, E-2320, E-3420, E-5420, E-2620, E-3620, E-5620. To use TheaterWatch The TheaterWatch application resides in the Windows systray. To...
  • Page 83 Using TheaterWatch Figure 28: TheaterWatch systray icon Note: After installation, a shortcut “TheaterWatch Client” is installed in the TheaterWatch installation directory. You can copy this shortcut to another loca- tion (e.g., desktop) if desired. After double-clicking this shortcut, the TheaterWatch console (see below) appears, allowing you to execute the TheaterWatch functions.

  • Page 84: Display Settings

    Using TheaterWatch Display settings General Figure 30: Display Settings dialog (display tab) The numbered icons in the upper part of the dialog represent the display controller heads supported by TheaterWatch. The display controller heads are also listed in the Display drop- down box.
  • Page 85 Using TheaterWatch corresponding display controller head from the Display drop- down box. Tip: If you click on a numbered icon, the corresponding number appears for a few seconds on the display or projector screen connected to that display controller head. In that way you can easily see which display or projector is connected to which head.
  • Page 86 Using TheaterWatch • To adjust display luminance manually, adjust the Luminance slider. This function is not available for MFCD/MFGD 1218 displays and MGP D5 projectors. The luminance setting is saved when the system is shut down. If the slider is positioned above the CAL mark, the luminance is in calibrated position, as determined during the latest calibration.
  • Page 87 Using TheaterWatch Graphic Board tab Figure 31: Graphic Board tab Here you can see information about the installed display controller: Name, serial number, driver version and firmware version. MGP D5 Dicom Theater Lite...
  • Page 88 Using TheaterWatch Calibration tab Figure 32: Calibration tab for projectors MGP D5 Dicom Theater Lite...
  • Page 89 Using TheaterWatch Figure 33: Calibration tab for displays Here you can calibrate display(s) and projector(s), revert to the latest calibration, revert to default factory settings and view the result of the latest calibration. The possible options are explained below. To calibrate a projector: 1.
  • Page 90 TheaterWatch and projector OSD (on-screen display) manipulations. To calibrate a display using the Barco LCD sensor: 1. If you have multiple displays of the same type in the system, consider if you wish to equalize the display you calibrate to a reference display.
  • Page 91 Using TheaterWatch 5. Select “Using the BARCO LCD sensor” and click OK. This option is grayed in case TheaterWatch does not find a connected Barco LCD sensor. 6. Follow the guidelines on the screen to complete the calibration successfully. Note:...
  • Page 92 Using TheaterWatch To calibrate a display manually: 1. Follow step 2 and 3 of the calibration with Barco LCD sensor (see page 91). 2. In the Calibration dialog, check the option Visually and click the OK button. The DICOM Optimizer dialog appears.
  • Page 93 Using TheaterWatch 3. Click the OK button. The calibration and the luminance will be reset to the latest calibrated position. Note: When you start up the system, the calibration is also reset to the latest calibrated position. The luminance, however, is kept at the latest value.

  • Page 94: Test Patterns

    Using TheaterWatch Test patterns Test Patterns Figure 37: Test Patterns dialog 1. Select the desired test pattern by clicking on the corresponding thumbnail or selecting a pattern by name from the Test pattern drop-down box. Click Show to display the pattern. If you have selected Custom Image, you can select a bitmap image (e.g., saved on the hard disk) as test pattern.

  • Page 95: Application Settings

    Using TheaterWatch Application settings Calibration tab Figure 38: Calibration tab Here you can check the Equalization option, allowing you to match the displays from a multi-head system to the luminance of the first calibrated display of the system. Suppose you work with a Dicom Theater system that contains two displays of the same type, and you wish display (2) to have the same output luminance as display (1).
  • Page 96 Using TheaterWatch BAR CO BAR CO (1) Reference display (2) Calibrated display: Luminance automatically matched to reference display Figure 39: Dual-head equalization The Equalization option will be available only if: • the system contains at least one display of the same type as the one being calibrated •...
  • Page 97 Using TheaterWatch Displays tab Figure 40: Displays tab In this dialog you get a list of Barco display and projector types compatible with TheaterWatch. If you wish certain displays from your system not to be controlled by TheaterWatch (e.g., because you wish to control them with MediCal Pro), you must deselect them in the list.

  • Page 98: Update Theaterwatch

    Using TheaterWatch MediCal Administrator tab Figure 41: MediCal Administrator tab Here you can connect to MediCal Administrator, if present. To connect to MediCal Administrator, click the MediCal Administrator button. As a result, the MediCal Administrator connection wizard starts. Please follow the guidelines from the wizard.
  • Page 99 Using TheaterWatch To update TheaterWatch: Select Update TheaterWatch from the Start > Programs > Barco TheaterWatch menu. The application will search via the Internet if TheaterWatch updates are available. If so, you will get the option to install them. MGP D5 Dicom Theater Lite...

  • Page 100: Troubleshooting

    Troubleshooting MGP D5 Dicom Theater Lite...
  • Page 101 Troubleshooting (This page intentionally left blank.) (This page intentionally left blank.) MGP D5 Dicom Theater Lite...

  • Page 102: Windows 2000 Display Resolution

    Troubleshooting Windows 2000 display resolution Tip: These instructions apply to both Windows 2000 and ® Windows ® Setting the resolution of your MGP D5 Dicom Theater display In order to set the resolution of your MGP D5 Dicom Theater display you must be logged in using an account with administrator privileges.
  • Page 103 Troubleshooting display should now synchronize and display the Windows desktop. 7. Click “Yes” when asked, “Your desktop has been reconfigured. Do you want to keep these settings?” To set the resolution of the second display attached to the BarcoMed display controller you are working with, go back to the “Settings”...

  • Page 104: Driver Re-Installation, Updates Or Removal

    Driver re-installation, updates or removal Driver re-installation, updates or removal Reinstalling or updating your BarcoMed 2MP2CP driver Note: These instructions apply to Windows 2000 and Windows Important for Windows 2000 or Windows XP users only: If you previously uninstalled the driver, do NOT allow the Windows Plug and Play software to reinstall the driver for you.

  • Page 105: Uninstalling The Barcomed 2Mp2Cp Driver

    Driver re-installation, updates or removal 3. To update the driver, clear the checkbox next to “DPMS Screen Saver” (figure 44) and click “Install”. Figure 44 4. For Windows 2000 or Windows XP please turn to Step 6 on page 40 in the section titled “Windows 2000 BarcoMed 2MP2CP software installation”...
  • Page 106 Driver re-installation, updates or removal Uninstalling the BarcoMed 2MP2CP driver 1. Insert your BarcoMed 2MP2CP Software CD into your computer’s CD drive. If the “BarcoMed Product Installation Wizard” doesn’t start within one minute, browse the contents of your MGP D5 Dicom Theater Software CD and double click on the file: “Setup.exe”...
  • Page 107 Driver re-installation, updates or removal Figure 46 6. Click “Next”. 7. If you installed your driver with DualView enabled, skip to step 8. If you installed your driver with Cloned Heads active, click “Next” to continue. Then click “Finish” to complete the uninstall process.
  • Page 108 Driver re-installation, updates or removal 10. When your system restarts, log in again using an account with administrator priveleges. DualView should now be disabled. 11. The “BarcoMed Product Installation Wizard” should automatically restart. Finish uninstalling the driver by clicking “Next” three times. Then click “Reboot”, “Finish” and “Yes”.
  • Page 109 Driver re-installation, updates or removal (This page intentionally left blank.) MGP D5 Dicom Theater Lite...

  • Page 110: Warranty Statement

    Warranty Statement MGP D5 Dicom Theater Lite...
  • Page 111 Warranty Statement (This page intentionally left blank.) (This page intentionally left blank.) MGP D5 Dicom Theater Lite...
  • Page 112 Warranty Statement ARTICLE 1: SERVICES BarcoView warrants that the equipment will be free of defects in workmanship or material for the warranty period. Notwithstanding the provisions of clause 2, repair and replacement of defects in material and/or workmanship under this warranty shall be accomplished in our works in the following manner: 1.1 The Customer, upon the occurrence of any equipment failure, shall contact BarcoView Customer Support Center (or an...
  • Page 113 Warranty Statement ARTICLE 2: ITEMS EXCLUDED FROM WARRANTY The warranty described herein shall not include the following: 2.1 Any hardware or software item procured from a source other than BarcoView or their official agent or distributor and integrated by Customer or a third party into BarcoView supplied equipment.
  • Page 114 Warranty Statement obligations under this paragraph shall excuse BarcoView's performance hereunder: 3.1 Customer shall not expose BarcoView personnel to any unsafe working conditions. 3.2 Repairs to equipment under warranty resulting from improper maintenance or repair performed by the Customer, or its officers, agents, employees, or representatives, shall be borne by the Customer at its additional cost and expense.
  • Page 115 Warranty Statement products or services covered by or furnished under this warranty condition, whether arising out of contract, negligence, strict tort, warranty or otherwise, shall not exceed the price of the item or items of goods or services upon which such liability is based. ARTICLE 7: FORCE MAJEURE Either party shall be released from performance of its obligations under this agreement to the extent, and for so long as, the...
  • Page 116 B4100518 - 00 November 2004 www.barco.com...

Table of Contents