Color (On Video Signals Only) - Barco MCM-100S User Manual

Image 10-3
2. Change the value to your wishes.
Image 10-4
3. Exit the menu.
You can also use the direct - CONTR + key on the RCU to adjust the contrast of the displayed image.

10.1.3 Color (on video signals only)

Description
Color adjustment is only available in case of PAL or SECAM video signals.
Adjust Color to change the color saturation of video signals. It can be adjusted within the range 0..127. Default value is 80.
Adjusting Color
1. In the OSD, navigate to Image > Settings > Color... and press ENTER to select.
Image 10-5
2. Change the value to your wishes, while looking at the displayed image.
R5905187 MCM-100S 05/06/2012
10. Basic operation
53