Barco MCM-100S User Manual page 100

11. Advanced operation
Image 11-25
6. Repeat step 4 and step 5 to link the Left input signal to Source 2.
7. Store the settings by clicking Apply or store the settings and leave the menu by clicking OK.
How to display an active stereo image starting from two passive stereo input signals?
1. Browse to Image > Passive to Active Stereo... and click Enter.
Image 11-26
2. Check the radio button next to Status On.
Image 11-27
A message can be read: Please select a stereo display mode!
3. Click OK to store the Status On setting and leave the dialog box.
4. Browse to Display setup > Stereo mode and select Always active.
96 R5905187 MCM-100S 05/06/2012