Barco MCM-100S User Manual page 68

10. Basic operation
Image 10-34
3. Move the slider or use the edit box to adjust the Red white level to a minimal value (e.g. < 10).
Image 10-35
4. Move the slider or use the edit box to adjust the Green white level to a minimal value (e.g. < 10).
5. Move the slider to adjust the Blue white level until bright spots appear/disappear on the white areas of the displayed pattern.
If the white areas look dark blue, increase the value. If they look pale blue, decrease the value.
A
Image 10-36
Input balance: White level adjustment on blue
A Black level is too low
B Black level is good
C Black level is too high
6. Move the slider to adjust the Green white level to the center of the range.
7. Move the slider to adjust the Green white level until bright spots appear/disappear on the white areas of the displayed pattern.
If the white areas look dark green, increase the value. If they look pale green, decrease the value.
64
B C
R5905187 MCM-100S 05/06/2012