Barco MCM-100S User Manual page 19

Rear panel
4
5
6
8
10
Image 3-2
Rear panel
• 1. Desktop Input : not supported by XDS CC Software.
• 2. Resolution switch : output switch between Full HD (1920x1080) and WUXGA (1920x1200) and reprogram input resolution
EDID.
• 3. Additional input slots : to connect analog RGB or DVI sources.
• 4. DVI input : to connect DVI sources.
• 5. DVI input : to connect DVI sources.
• 6. Stereo inputs: to connect stereo control signals.
• 7. RJ 45 connector : to connect TCP/I¨P.
• 8. DVI out : to connect an external display (e.g. projector, etc.);
• 9. Stereo sync out : to drive emitters or for linking.
• 10. Power input : to connect the power adaptor, which is delivered with the device.
• 11. Fuse : main AC input fuse.
Remote Control Unit
Image 3-3
Remote Control unit
Use the Remote Control Unit (RCU) to operate the device through the OSD (On Screen Display).
R5905187 MCM-100S 05/06/2012
1
2
3
7
9
11
3. Introduction
15