Barco MCM-100S User Manual page 112

12. Expert operation
Y
Image 12-1
Example: Axis link set to Off
4. Now adjust the PixelsY position to +300 to move the top left corner down.
The left corner is shifted downwards along the Y-axis which is still vertical.
300,300
Image 12-2
Example: Axis link set to Off
Example (2 x 2 mode) – Axis link set to On
Following procedure illustrates a basic 2 x 2 adjustment with Axislink set On and Off.
1. Start with a non-distorted image.
2. Set Axislink to On.
3. Adjust the value of PixelsX (row 0; col 0) to +300 to move the left top corner to the right.
Image 12-3
108
X
X
Y
R5905187 MCM-100S 05/06/2012