Barco MCM-100S User Manual page 123

Desired values
Cyan, Yellow, Magenta
L value
Lmax value
Button
Default desired
Factory Preset
Calibration
Image 12-26
R5905187 MCM-100S 05/06/2012
Description
Desired secondary colors of the display channel of this MCM-100S.
Luminance (relative value).
Maximum available luminance (relative value).
Description
Resets the desired parameters to the measured values.
Sets the measured parameters back to the factory values. Not to be used.
Starts the native primary color calibration procedure. Only Barco trained and
qualified engineers may perform a calibration. A professional spectrometer
and ideal measurement conditions are required to achieve a good calibration.
Improper calibration seriously affects the color reproduction.
12. Expert operation
119