Barco MCM-100S User Manual page 32

6. Physical installation and connections
L2A
L3A
IN1 IN1 IN2 IN2
L1 L1
Image 6-12
Stereo inputs per layer
The BNC connectors are the stereo output sync signals. These signals will drive the emitters in case of active stereo projection
using active stereo glasses. The fact that the MCM-100S is providing two BNCs is to allow the linking (stereo synchronization) of
several devices in a multichannel system (see Multichannel installation).
IN1 IN1 IN2 IN2
L1 L1
Image 6-13
Stereo sync outputs
The 2 BNC's are identical i.e. it does not matter to which BNC the emitter is connected.
Connecting the stereo input and output signals
1. Connect the mini-din male connector(s) to the MCM-100S female mini DIN connector(s)
28
XDS-100
L2B
L3B
IN1 IN1 IN2 IN2 IN1 IN1 IN2 IN2
L2 L2 L3 L3
STEREO INPUT STEREO INPUT STEREO OUTPUT STEREO OUTPUT
XDS-100
IN1 IN1 IN2 IN2 IN1 IN1 IN2 IN2
L2 L2 L3 L3
STEREO INPUT STEREO INPUT STEREO OUTPUT STEREO OUTPUT
R5905187 MCM-100S 05/06/2012