Barco MCM-100S User Manual page 46

7. Setup and configuration
During alignment, one can now choose to match the colors of all projectors or monitors by simply clicking one of the Dynacolor
buttons. This assumes however that colors have been accurately measured and defined in the MCM-100S for each channel of the
display system. This can only be done by a Barco trained and qualified technician.
Setting an MCM-100S to be Master
1. In the OSD of the MCM-100S to be Master, navigate to Installation > Linked devices... and press ENTER to select.
Image 7-13
2. In the dialog box that appears, set the Master check box.
Note: The layout of the dialog box depends on the activation of the stereo option. When the stereo option is activated, the
stereo column is available.
Image 7-14
Defining the Slave MCM-100S devices in the Master MCM-100S
1. In the OSD of the Master MCM-100S, navigate to Installation > Linked devices... and press ENTER to select.
42 R5905187 MCM-100S 05/06/2012