Barco MCM-100S User Manual page 84

10. Basic operation
A Custom Image file can only be forced (linked) to a specific connector if there is a source connected to it and
if that source is being displayed!
Linking (forcing) a Custom Image file to a certain input connector
1. In the OSD, navigate to Image files > Forced file load...
Image 10-75
2. Navigate through the submenus to select the Layer (1, 2, 3 or 4) and the connector.
Image 10-76
3. Confirm by pressing ENTER.
4. In the dialog box, navigate to the desired Image file and press ENTER to select.
80 R5905187 MCM-100S 05/06/2012