Barco MCM-100S User Manual page 103

SOURCE = mono
@100Hz (low mode) or @120Hz (high mode) according to setting of Async frequency
48
Image 11-32
Mono source : Full screen synchronous representation OFF and Stereo Mode = Always Active (stereo mode needs to be enabled)
SOURCE = mono
48
Image 11-33
Mono source : Full screen synchronous representation OFF and Stereo Mode = Auto
Stereo mode auto is only available if the stereo option is enabled. If stereo option is not enabled, then by default auto, but only mono
sources can be displayed.
SOURCE = Mono
@2xf
ASYNC
50
ASYNC:
@100Hz (low mode)
@120Hz (high mode)
Image 11-34
Mono source : Full screen synchronous representation ON and Stereo Mode = Always Active
SOURCE = Mono
ASYNC
50
ASYNC:
@50Hz (low mode)
@60Hz (high mode)
Image 11-35
Mono source : Full screen synchronous representation ON and Stereo Mode = Auto
Stereo mode auto is only available if the stereo option is enabled. If stereo option is not enabled, then by default auto, but only mono
sources can be displayed.
R5905187 MCM-100S 05/06/2012
FULL SCREEN SYNCHRONOUS MODE = off
STEREO MODE = always active
FULL SCREEN SYNCHRONOUS MODE = off
STEREO MODE = auto
@50Hz (low mode) or @60Hz (high mode)
FULL SCREEN SYNCHRONOUS MODE = on
STEREO MODE = always active
@2xf
ASYNC ASYNC
60
SYNC:
@50Hz (±0.5Hz) or @60Hz (±0.5Hz) but displayed @100Hz or @120Hz
@100Hz (±0.5Hz) or @120Hz (±0.5Hz)
FULL SCREEN SYNCHRONOUS MODE = on
STEREO MODE = auto
ASYNC ASYNC
60
SYNC:
@50Hz (±0.5Hz) or @60Hz (±0.5Hz)
@100Hz (±0.5Hz) or @120Hz (±0.5Hz)
ASYNC
ASYNC
ASYNC
100
ASYNC
100
11. Advanced operation
120
f(Hz)
120
f(Hz)
ASYNC
120
f(Hz)
ASYNC
120
f(Hz)
99